Wastewater Plant - Maintenance & Operations Technician I
- Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure.
- Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.
- Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule. Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder.
- Performs routine lab tests and prepares reports per procedure.
- Performs routine instrument calibration for portable meters including, but not limited to, dissolved oxygen, pH, H2S, percent oxygen, lower explosive limit.
- Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.
- Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes.
- Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.
- Learns to estimate time and material costs for various projects. May assist in other areas of facility as directed.
- Spends 100% of the time in operations environment.
- Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather.
- Company service vehicles are used as required.
- Travels 1 - 2 times per year for company provided training.
- May be required to travel up to five consecutive days.
- May serve rotational 24 hour emergency on-call.
- Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.
- High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.
- Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals.
- Experience using material handling equipment, pressure gauges and precision measuring instruments.
- Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred.
- Ability to perform basic mathematical calculations.
- Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.
- Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action.
- Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC.
- Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.
- Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.
- Must be able to serve rotational 24 hour emergency on-call if required by site.
- Minimum water/wastewater license as required by regulatory agency at site.
- Must possess a valid driver's license and a safe driving record.
- Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training.
- HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site.
- Obtain and maintain minimum water / wastewater operator state certification.
- Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)
- Forklift Certification if required by site.
- Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems.
- Obtain HVAC, Electrician, Plumber's or other trade License if assigned to that area. Note: Tech will not perform duties unless properly licensed.
- Training in the use of energy management systems as needed.
- Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications.
- May perform more advanced functions as part of training and development.
- Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.
- Requires close visual and hearing observation to detect non-conformance and machine malfunction.
- Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.
- Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.
- Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.
- Occasional stooping, bending or kneeling and entering confined spaces.
Recommended Jobs
Plant Manager - Mason Area
Plant Manager | Mason, MI Salary Range: $142,000 - $193,000 depending on experience Are you a dedicated professional with a passion for leading manufacturing operations and drivin…
Manufacturing Design Engineer
We make life more comfortable. Leggett & Platt’s overall mission is a commitment to enhance lives – by delivering quality products, offering empowering and rewarding careers, and doing our part…
Tax Planning Specialist
Tax Planning Specialist Hantz Group is a Michigan-based financial company that works with individuals and businesses to help them achieve their financial goals. We are a Family Office that manage…
Project Manager - Wyoming Area
Project Manager | Wyoming, MI Salary Range: $83,000 - $128,000 depending on experience Are you a dynamic leader with a passion for delivering projects on time and leading cross-fu…
Special Education Teacher
Crossroads Charter Academy is currently hiring a part-time Elementary Special Education Teacher for the 2025/2026 school year. 20 hours per week. Must have Teacher Certification and Endorsement. …
Construction Project Manager
- Please note that this position does not provide visa sponsorship. - Principals only, we are not accepting agency resumes for this role. About Us SFV Services is a family of construction and …
Marketing Specialist - Remote, US
Short Description Bowman has an opportunity for a Marketing Specialist to join our team remotely. Bowman is a growing, dynamic and nationwide engineering firm that is seeking an experience…
CDL-A Truck Driver - 1099 - Up to $5,000 / week (Battle Creek)
Contracting CDL-A Truck Drivers RUN YOUR BUSINESS, RUN UP YOUR PAY - Lease drivers gross $4,000-$5,000/week EARN MORE WITH EVERY LOAD - Up to 75% of linehaul + 100% FSC FREEDOM TO DRIVE Y…
Accountant II
Description Who are we? Michigan Millers Mutual Insurance Company, an affiliate of Western National Mutual Insurance, is a mutual insurance company, rated A (Excellent) by A.M. Best, with over …